During use, computer monitors are commonly placed either on a desk or on a table. Mounting your computer to the wall might be as a result of certain conditions. Mounting your personal computer is a procedure that most people are not familiar with. Mounting your monitor to the wall is a simple task especially if you own a liquid crystal monitor. An hour is enough to install your monitor to the wall and have it functioning after purchasing a mount. The use of mounted PC is prevalent, especially in institutions of higher learning as they carry out a lot of projection work. Wall mounted PCs are mostly placed in places with good air circulation hence they do not overheat. Steel, plastic or wood are among the materials that can be used as base materials.
To mount your personal computer to the wall, you need to read this article as it explains the procedure and tips that you should follow. Weight, size and mountability are essential factors to consider when choosing base material for a custom wall mounted PC. Installing a monitor requires that you first establish the exact place where you will fix it. For the monitor to be able to connect to other cables and its CPU, consider placing it in a reachable place. Secondly, ensure that the monitor fits properly in the mounting holes which are found at the back of the monitor. If you find out that it does not fit accordingly, make sure you buy an adapter plate. The monitor is ready for installation after establishing that it fits properly.
Install the mount into the stud as this is the next step that you ought to ensure. If you find it difficult to get the needed stud, you can purchase a hardware kit but these will cost you more. The location where you are going to drill your first hole ought to be marked after locating the studs. For a good installation of your monitor, make the first hole on the top left. Someone is needed to help you hold the mount and level it using the reference hole drilled on the top left.
Mark the other three holes on the walls after making sure that the mount is in level. After marking, drill the holes into the wall. After drilling the holes you can screw the monitor into the mount. Connecting your computer to a power cable and other cables is the next step. Lastly, you should test the monitor to determine whether everything working as required. By following these guidelines, you will have mounted your monitor.
3 Lessons Learned:
A Quick Overlook of – Your Cheatsheet